上海标星科技发展有限公司
K&M Technologies Ltd.
• Website
：
• Email:
• Tel: +86 0512 - 57403727
Note1:
press this key to move the cursor to select the function icon or parameters needed,then
confirm for adjustment. Press this key can also adjust the values. Hold longer to speed up the
adjustment. For programmed model, hold this key longer on the main page,“clear count to
zero”menu will appear.
Note2:
Select the parameter to be adjusted, shortly press the Enter key to start the adjustment,
press it again to exit the adjustment; long press on this key will return to previous page. For
programmed model, long press on the Enter key on the main page, welding horn adjustment
page will appear.
Note3:
on the main page, press this key to start the frequency searching and reset the over-limit
alarm status, and press this key, the function menu or parameter setting will return to main page.
7.How to Set Parameters for Continuous Welding?
