background image

30

31

EN

  

Juice Dispenser FSD3000 / FSD3100 

            © K. & M. Holland GmbH

© K. & M. Holland GmbH 

Juice Dispenser FSD3000 / FSD3100

  

EN

Subject to technical change without prior notice! Version 1.0, 05/02/2015

Subject to technical change without prior notice! Version 1.0, 05/02/2015

9.1 Daily cleaning

Following appropriate instructions, the operating personnel may be permitted to proceed with 
the cleaning tasks.

CAUTION 

Be advised that sharp corners and components on the equipment may cause cut-

ting injuries to hands and fingers during the cleaning process.

NOTE 

Lukewarm water and some cleaning detergent is perfectly suitable for the cleaning 

purposes. Never attempt to use cleaning agents that contain sand, abrasives, soda, 

acid, or chlorine. Do not use chemical solutions.

CAUTION

Do not use spray water when cleaning the juice dispenser.

1

  Close the valve to the concentrate bag and dispense about 0.2 L of water into an approp-

riate vessel.

2

  Activate the equipment switch in order to turn off the juice dispenser. It is not necessary to 

disconnect the mains power plug.

3

  In order to prevent the build-up of mould fungi, ensure to remove the residue of juice and 

concentrate from the drip tray, the drip grid, the underside of the door, and the splash gu-
ard. Use a mild cleaning agent to clean the equipment and rinse thoroughly.

4

  Use clear water to rinse the juice dispenser inside and outside. Use a cloth to wipe the dis-

penser dry.

5

  Use a brush or vacuum cleaner to clean the exhaust and inlet air ducts of the juice dispen-

ser. If necessary, remove the air filter from the back panel of the equipment and clean it.

CAUTION 

Dirt accumulation on the air filter prevents proper air circulation and may cause da

-

mage to the refrigeration system.

Summary of Contents for FSD3000













































Reviews: