User manual
wM-Bus Dongle SW Tool
Appendix D:
Hydrometer set-up
5512-1
057
GB /
12.2011 /
A1
Figure 11
Set-up of a Hydrometer meter:
•
Find the meter on the
Main
tab, and transfer the data to the relevant
Meter X
tab.
•
Set
Meter install state
to 1 as there is no installation procedure for Hydrometer.
•
Set
Meter M-BUS address
to where you want the meter to respond on the M-Bus.
•
T1
,
T2
,
IEK
,
KEY
,
Rev B barcode
and the
Option Board
data fields are not used.
Warning:
If [Get Meter X Settings] is clicked, do not click [Set Meter X Settings] as this will destroy
the meter settings (Hydrometer addressing is proprietary, and setting the address after getting the
meter settings will result in a wrong address).
14
