User manual
wM-Bus Dongle SW Tool
Appendix A:
DSMR set-up
5512-1
057
GB /
12.2011 /
A1
Figure 8
Set-up of a DSMR meter:
•
After starting the meter, find the meter in the
Main
tab, and transfer the data to the wanted
Meter X
tab, or enter the meter data manually.
•
Set the
OPTIONS to 0x07 0x0F
, depending on whether the wired M-BUS should be encrypted or
not.
•
Set
Meter install state
to 255. Next time the meter sends out an
ACCESS DEMAND INSTALL STATE
(CI=0x06)
, the Dongle will acknowledge this, and the state will change to 1 when seeing the
next message from the meter.
•
Set
Meter M-Bus address
to where you want the meter to respond on the M-Bus.
•
Rev B barcode
is not used.
11
