Kamstrup ULTRAFLOW 54 DN150-300, Technical Description

Page: 11 / 62

TECHNICAL DESCRIPTION ULTRAFLOW® 54 DN150-300
Kamstrup A/S · Technical description · 5512-876_M1_GB_12.2020
11
Programming options of meter factor and pulse durations
Overview of programming options as to meter factors (CC) and pulse durations
(
E) for separate ULTRAFLOW®
q
p
[m³/h] [p/l] [l/p] CC [ms] (E=1) [ms] (E=4) [ms] (E=5) [ms] (E=6)
150 1 33 3.9 - - - Default
150 10 34 - 20 - -
150 25 64 - 20 - -
150 100 35 - 20 50 100
150 250 65 - 20 50 100
150 1000 36 - 20 50 100
150 2500 66 - 20 50 100
250 0.6 43 3.9 - - - Default
250 10 34 - 20 - -
250 25 64 - 20 - -
250 100 35 - 20 50 100
250 250 65 - 20 50 100
250 1000 36 - 20 50 100
250 2500 66 - 20 50 100
400 0.4 63 3.9 - - - Default
400 100 35 - 20 50 -
400 250 65 - 20 50 100
400 1000 36 - 20 50 100
400 2500 66 - 20 50 100
600 0.25 14 3.9 - - - Default
600 100 35 - 20 50 -
600 250 65 - 20 50 -
600 1000 36 - 20 50 100
600 2500 66 - 20 50 100
1000 0.15 24 3.9 - - - Default
1000 (0.25) 4 14 3.9 - - - *)
1000 100 35 - 20 50 -
1000 250 65 - 20 50 -
1000 1000 36 - 20 50 100
1000 2500 66 - 20 50 100
*) Spare part for ULTRAFLOW
®
type 65-S/R/T. Configured 65-5-FGCR. No flow info.
Meter factor Pulse duration
Table 6. Programming options as to meter factor (CC) and
pulse durations (E) for ULTRAFLOW® 54 DN150-300.
Based on a q
p
value a meter factor in Table 6 is chosen. The valid possible pulse durations are listed on the same line as
the chosen meter factor.
Example: For ULTRAFLOW® 54 q
p
400 m
3
/h a meter factor of 100 liter/pulse (CC=35) is required. Based on this meter
factor one of the pulse durations, 20 milliseconds (E4) or 50 milliseconds (E5), is selected.
Default values in Table 6 are programming values for ULTRAFLOW® 54 when connected to a Kamstrup MULTICAL®
calculator.