Venkon XL
Assembly, installation and operating instructions
35
Connecting the condensate pump
Push the suction hose as far as it will go and fix in place with a cable tie to prevent the pump from running dry.
Cable tie
Suction hose
Suction connection
Condensation pump
Fig. 16: Fixing the suction hose
Supply power and wire alarm contact (separate cable with plug) as per the wiring diagram.
Connect the hose to the condensate drain (separate). Direction of flow: refer to the arrow on the side of the housing
Technical Data
Maximum flow rate
42 l/Hr. (11 GPH)
Maximum suction
3 m (9.80 ft.) self priming
Maximum head
20 m (65.60 ft.)
Maximum horizontal run
100 m (330 ft.) at 0 head and 0 suction
Sound
20 dBA at 1 m DIN EN ISO 3741:2011 / DIN EN ISO 3744:2010
Voltage
100 ~ 240 VAC 50/60 Hz auto sensing universal power input
Power
8W during maximum operation at 110V
Alarm relay
7 Amps contacts with integrated replaceable 6.3A fuse 5 × 20 mm
Weight
1‘000 g (2.2 lb.)
Discharge star tube
6.25 mm I.D. (1/4“) × 1 m (3.3 ft.)
Packaging dimensions
250 x 340 x 54 mm (9.9 x 13.4 x 2.1 inches)
Color
RAL #7040 Grey and RAL #1023 Yellow
Protection:
Fully potted, IP-44
Operation temp:
Ambient 5°C to 40°C (41°F to 104°F) / Water 5°C to 40°C (41°F to 104°F)
Compliance:
Conforms to UL: 778 and certified to CSA C22.2 #68
Tab. 7: Technical data for condensate pump
Summary of Contents for Venkon XL
Page 2: ......
