PowerKon LT
PowerKon LT
Assembly, installation and operating instructions
43
10.3 Maintenance work
10.3.1 Clean the inside of the unit
Check all elements that come into contact with air (internal surfaces of the unit, outlet elements etc.) for dirt or deposits dur-
ing maintenance and use a commercially available product to remove.
Remove the casing upwards.
When refitting, make sure that the side recesses are sitting correctly on the
wall bracket.
10.3.2 Replacing the filter.
CAUTION!
Risk of injury from sharp metal housing!
The inner metal of the casing can have sharp edges.
Wear suitable protective gloves.
Vacuum the filter from below.
Replace the filter if there is a high level of dirt.
