PowerKon LT
PowerKon LT
Assembly, installation and operating instructions
34
7.4
Connection display control (*N2)
Circuit description (*N2)
Units with display control are fully wired and supplied ex-works with all electrical components and a connection cable
with a standard European plug.
1
Power supply 230 V
2
Condensate pump power supply 230 V
3
Valve drive(s) 230 V Open/Closed
4
Heat pump contact On/Off (potential-free)
5
Heat pump contact heating/cooling (potential-free)
6
Digital input (unit On/Off)
7
Group formation bus connection (max. 30 units)
8
Unit address DIP switch
9
Unit configuration DIP switch
10
Condensate alarm connection
11
Connection of temperature sensors T1, T2, T3
