4
.
4.42
Katherm QK nano –
Ultra-small trench heater with EC tangential fan
Ready-to-install convector-based floor trenches
Assembly and installation instructions
1. Intended use
Kampmann
Ka
therm
QK nano are built in line with the state of the art and
recognised safety regulations. Nevertheless their use can result in danger
to people or damage to the unit or other material property if they are not
properly installed or properly used.
Ka
therm
QK nano are solely intended for use indoors (e.g. residential and
commercial properties, showrooms etc.). They are not suitable for use in
humid environments, such as swimming pools or outdoors. Protect the
products from any moisture during installation. Check the intended use
with the manufacturer in case of any doubt. Any use other than the use
specified above is deemed not to be correct and proper. The operator of the
unit is solely responsible for any damage arising as a result of this. Correct
and proper use is deemed to include compliance with the installation
instructions described in these instructions.
The installation of this product requires specialist knowledge
of heating, cooling, ventilation and electrical engineering. This
knowledge, generally learned in vocational training in the fields
mentioned in section 2, is not described separately. Errors caused by
connection or modifications can lead to the unit being damaged!
The manufacturer is not liable for any damage caused by the wrong
connection and/or improper handling.
Important:
The grilles can be walked on. However, avoid point loads (for
instance caused by chair legs) as they can result in permanent damage to
the grille.
Ka
therm
QK nano
1
FineLine Q grille (orthogonal grille)or alternatively FineLine L (linear grille)
2
EC tangential fan
3
Cu/Al heat exchanger
4
Floor trench
5
Flow, 1/2“ female
6
Return, 1/2“ female
7
Height adjustment feet with sound insulation
8
Raised floor feet with sound insulation
9
Cross bracing
10
Water pipe opening
11
Cable openings
12
24 V terminal strip
13
Junction box cover
Example:
Ka
therm
QK nano, 24 V model
Caution:
Do not remove bracing
1
3
2
5
6
9
7
10
12
11
8
13
4
