AUTHORIZATION TO MARK
Applicant:
Manufacturer:
Address:
Address:
Country:
Country:
0
2
Standard(s):
Product:
Brand Name:
Models:
Katherm QK may be followed by nano; followed by one to four numbers; followed by 24; followed by three
numbers; followed by /; followed by three numbers; followed by /; followed by two to five numbers;
followed by R-Rost, L- Rost; followed by one to three numbers; followed by alu. natur elox, steel, wood or
brass.
Katherm HK may be followed by 2-Lt., 4-Lt.; followed by 24; followed by three numbers; followed by /;
followed by three numbers; followed by /; followed by two to five numbers; followed by R-Rost, L- Rost;
followed by one to three numbers; followed by alu. natur elox, steel, wood or brass.
Baseboard HK.
Baseboard QK.
This Authorization to Mark is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are
limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned
by the use of this Authorization to Mark. Only the Client is authorized to permit copying or distribution of this Authorization to Mark and then only in its entirety. Use of Intertek’s Certification mark is
restricted to the conditions laid out in the agreement and in this Authorization to Mark. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must
first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the
agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect.
Intertek Testing Services NA Inc.
545 East Algonquin Road, Arlington Heights, IL 60005
Telephone 800-345-3851 or 847-439-5667 Fax 312-283-1672
Heating and Cooling Equipment>Valid without technical revision: 01Jan2024< [UL 1995:2015
Ed.5+R:17Aug2018]
Heating And Cooling Equipment [CSA C22.2#236:2015 Ed.5]
Trench Heating / Cooling convectors
image only
Control Number:
5017050
Authorized by:
for L. Matthew Snyder, Certification Manager
This document supersedes all previous Authorizations to Mark for the noted Report Number.
Party Authorized To Apply Mark:
Same as Manufacturer
Report Issuing Office:
Intertek Deutschland GmbH, Kaufbeuren
KAMPMANN GmbH & Co. KG
Kampmann HVAC Sp. z o. o.
Friedrich-Ebert-Str. 128-130
49811 Lingen
ul. Lotnicza 21f
99-100 Łęczyca
Germany
Poland
This authorizes the application of the Certification Mark(s) shown below to the models described in the Product(s)
Covered section when made in accordance with the conditions set forth in the Certification Agreement and Listing
Report. This authorization also applies to multiple listee model(s) identified on the correlation page of the Listing
Report.
This document is the property of Intertek Testing Services and is not transferable. The certification mark(s) may be
applied only at the location of the Party Authorized To Apply Mark.
Page 2 of 2
ATM for Report 2244588KAU-001
ATM Issued: 10-Mar-2022
ED 16.3.15 (16-Oct-2021) Mandatory
Summary of Contents for Katherm HK
Page 2: ...2...
