3
Item
Qty
Tent flysheet
1
Inner tent
1
Pump
1
Peg bag
1
Carry bag
1
The inner tent may already be attached to the tent and can be left attached for
take down and setup.
If you are missing any parts please contact your supplying dealer.
Before using for the first time please check the contents of your tent
SITING
Choose a site that is flat and, if possible, protected from the wind. Try to clear
the site of sharp stones to avoid damaging the groundsheet. A footprint
groundsheet is available as an optional extra – please see your dealer for more
information. Try to set up your tent with the doors facing away from the wind.
Avoid pitching under trees as falling branches, sap, etc could damage your tent.
SET UP
To protect your tent from dirt and damage, it may be beneficial to lay a footprint
(available as an optional extra) or groundsheet down before unpacking. Unpack
the tent and separate and identify the different parts. Assemble the aluminium
porch pole, this is shock corded and just needs slotting together. Ensure that
each pole is fully inserted into the adjoining pole.
4
2
3
IMPORTANT
It
is
important
that
whilst
unscrewing/replacing the inflation/
deflation valve that the valve does
not spin in the AirPole. You can
prevent this from happening by
holding the valve in place where it
meets the AirPole. In picture (2) the
left hand is holding the valve in
place. If the valve spins it will twist
the inflation tube in the pole and
may lead to premature failure. If
you suspect this has happened do
not
inflate
your
tent
before
untwisting the tube. Unscrew the
valve from the AirPole and check
that the inflation tube is not twisted.
Before replacing the valve ensure
that the black sealing washer is in
place (3).
WARNING
NEVER OPEN THE ZIP ON THE
INNER TUBES WHILST THE POLES
ARE INFLATED. THIS WILL RESULT
IN THE POLE BURSTING.
Unroll and lay the tent out in the
required position (1). Peg each
corner of the tent ensuring that you
tension the tent between the pegs
and making sure that the tent keeps
it rectangular shape. You will
probably need to re-peg later.
1