Kampa Fornello, Operating Manual

Page: 16 / 152

16 4445103380
3. Disconnect the device from the gas container
(see chapter “Disconnecting the device from
the gas container” on page 15).
4. Clean the device (see chapter “Cleaning and
maintenance” on page 15).
5. Close the lid.
6. Store the device on a level, stable place out of
the reach of children or pets.
7. Store the gas cylinder outdoors in a well-venti-
lated, shaded area away from any heat source
or open flame and out of reach of children,
pets or wild animals.
Troubleshooting
Fault Possible cause Solution
The ignition fails. The control knob of the desired burner is
not in “MAX” position. Turn the control knob of the desired burner
to “MAX” position (see fig.
7
, page 7).
The control knob of the desired burner is
defect. This can only be repaired by an authorized
repair center.
The air inlet of the burner is blocked. Clean the air inlet (see chapter “Cleaning
the burners” on page 15).
The injector is blocked. Clean the injector (see chapter “Cleaning
the burners” on page 15).
The gas container is not connected prop-
erly. Connect the gas container properly (see
chapter “Connecting the device to a gas
container” on page 14).
The electrode of the ignition button is bent
or rusty. Clean the injector (see chapter “Cleaning
the burners” on page 15).
The gas container is empty. Replace the gas container (see chapter
“Connecting the device to a gas
container” on page 14).
The burner provides no
gas with the burner con-
trol knob in “MAX” posi-
tion. The control knob of the desired burner is
defect. This can only be repaired by an authorized
repair center.
The air inlet of the burner is blocked. Clean the air inlet (see chapter “Cleaning
the burners” on page 15).
The injector is blocked. Clean the injector (see chapter “Cleaning
the burners” on page 15).
The gas container is not connected prop-
erly. Connect the gas container properly (see
chapter “Connecting the device to a gas
container” on page 14).