Kamoer fluid tech(Shanghai)Co., Ltd. UIP WIFI User Manual
8
this function to copy a volume first;
h, working volume:
display the working volume, when the ration mode starts working, the value
decreases with the work of the pump, indicating the working process;
i. Pause time:
the interval between each filling in the automatic mode of the ration mode;
j. Cycle mode and progress display:
The ration mode has two modes: full-automatic and
semi-automatic. When working in semi-automatic mode, the number represents the number of
times of work. When working in the fully automatic mode, the number format is the number of
times of work. / target work times;
k. Settings:
Click to enter the ration mode setting interface. For details, see 2.2.1 Ration Mode
Settings.
l, Direction button:
click to switch the direction of rotation of the pump, set when the pump stops
running, can not operate when the pump is running;
m, Pause time:
Click to set the allocation mode pause time, the unit is second;
n, The number of cycles:
click the number of cycles to set the automatic mode of the ration
mode;
o, Start/Stop button:
assign mode start stop button; in semi-automatic mode, when the set
working volume finishes running, the ration mode stops automatically. In the fully automatic
mode, when the cycle number runs out, the ration mode stops automatically;
p, Wi-Fi status display:
Here shows the status of Wi-Fi, the specific Wi-Fi status refers to 3.2
ration network chapter;
2.2.1 Ration mode setting
In the ration mode, click the "Settings" button in the lower left corner to enter the ration
mode setting interface:
Figure 2-2-1-1 Assignment Mode Settings
a. Tube type setting:
Click to enter the tube type selection interface and select the corresponding