37
7
Components list
Open the packaging carefully and check all the components listed below:
• Chainsaw
• 2 Batteries
• Battery charger
• Toolbox
• Bar cover
• User’s manual
7.1
Display
Fuctions description and screen display
No.
Display items
Icon
Content
Operation method
1
Key 1
View shift
Press for 2 seconds
2
Key 2
ON/OFF y ajuste
valores
Press for 2 seconds
3
Battery charge
status
25.2V/100%
No operable
4
Display and
volumen
adjustment of
injected oil
You can set the
amount of
injected oil
1. Oil quantity adjustment:
press key 1 until the "1" Hz
number starts to flash, then
press key 2 to adjust the pulses
of oil delivered by the pump
from 1 to 3 Hz.
2. Oil delivery rate setting:
press key 1 until the number
"10%" starts to flash, and then
press key 2 to adjust the oil
delivery rate.
3. Forced oil injection: Press
and hold key 1 (for 3s) to start
forced oil injection, the figure
------will flash, the oil pump will
start up. To stop the forced
injection, hold down the key 1
(for 3 s) to stop the oil injection.
5
Display of
usage time
Select display
time
Press key 1 until the mark in the
lower corner of the clock starts
to flash, then press key 2 to
toggle between one-time use
time and the total use time
6
Electric motor
controller
temperature
display
60
℃
Celsius degrees
No operable
Summary of Contents for KVS6000
