ELECTRIC PRUNING SHEARS
ELECTRIC PRUNING SHEARS
52
53
www.kamikazevolpi.com
www.kamikazevolpi.com
PL
Instruk
cja użytkownika
PT
Manual de uso
FR
Guide de l
’utilisat
eur
EN
User’
s manual
ES
Manual de uso
G. Clean up the rubbish as shown
and grease the counter blade.
I. Screw the M3 hexagon socket
screws with a hex head wrench
as shown.
J. Turn the hexagon screw of the
blade counterclockwise as
shown in the picture.
H. Grease the blade rack gear
according to the picture and
reinsert the blade into its
housing, then correctly position
and close the cover.
G
I
J
H
K. Mount and tighten the M5 socket
screw clockwise as shown in the
picture. Also insert the rubber cap.
L. Place the hexagonal screw
of the blade by screwing
counterclockwise as shown in
the picture, do not overtighten
the nut. The clearance between
the blade and the counter blade
should not be less than 0.03mm.
K
L
K. Screw the M5 hexagon socket
countersunk head clockwise as
shown in the picture.
L. Reduce the friction between
the two plans of the blades by
adding grease through the hole
of the plastic cap as shown in
the picture.
M
N
