Manual: CMOS Industrial Camera LOGLUX
i5
Version 1.08 (04/07)
KAMERA WERK DRESDEN GmbH
Page 15 of 46
The 'Camera globals' menu
This menu is used for renaming the selected camera, setting the communication speed, selecting the
camera profile, and displaying two camera temperature values.
The user can change the name of the selected
camera in the 'Camera Name' input field. All
upper-case
and
lower-case
letters
and
numerals as well as the separating character
'_' are available. The new name will be valid,
and the respective entry in the tree structure
updated, immediately upon leaving the input
field. The camera name may have up to 32
digit positions.
The
'Baudrate'
option
allows
the
communication speed to be set. Once set, the
speed will be immediately available. It should
be noted that a baud rate of '9600' only is
available when the camera is configured via
the CameraLink
™
interface.
Under 'Active Profile', the user can select the
camera profile to be used from four different,
factory-set camera configurations. Selectable
are all profiles visible in the tree structure.
The currently used profile is displayed in the
tree structure with a preceding green arrow.
The 'Temperature' status field displays the
temperature measured at the sensor in the
camera.
Figure 11 :
The 'Camera globals' menu
