15
Stick Mixer
Before cleaning, turn the power off
at the power outlet and then remove
the power plug from the outlet.
Remove the motor body from the
stainless steel blending shaft.
The stainless steel blending shaft
should be hand washed in hot soapy
water, rinsed and dried thoroughly
after each use.
Do not use abrasive cleaners or
steel wool.
QUICK WASH: Between each
processing task, with the motor body
attached and turned on at the
power outlet, place the stainless steel
blending shaft and blade assembly
into a jug of water and press the ‘ON’
button for 5 seconds. This will remove
any foodstuffs on the blade and shaft
and allows you to quickly continue
onto the next processing task.
Accessories
Chopper Bowl
Before cleaning the chopper bowl,
turn the power off at the power outlet
and then remove the power plug
from the outlet. Remove the motor
body from the chopper bowl lid and
chopper blade from the chopper bowl.
The chopper bowl, chopper bowl lid
and chopper blade should be hand
washed in hot soapy water, rinsed and
dried thoroughly after each use.
Do not use abrasive cleaners or
steel wool.
Only the chopper bowl is dishwasher
safe. Do not wash the chopper
blade and chopper bowl lid in the
dishwasher.
Care, Cleaning and Storage
Masher Attachment
Before cleaning the mashing
attachment, turn the power off at
the power outlet and remove
the power plug from the outlet.
Remove the motor body from the
mashing attachment by pressing
the ‘Release’ buttons.
Turn the mashing attachment
clockwise to detach it from the
mashing attachment connector.
The mashing attachment and mashing
attachment connector can be hand
washed in warm soapy water, rinsed
and dried thoroughly after each
use. Only the masher attachment
is dishwasher safe. Do not put the
masher attachment connector in the
dishwasher.
The mashing blade can be removed
for cleaning by holding the shaft
firmly and unscrewing the cap in a
clockwise direction. After cleaning,
dry thoroughly and replace the
blade and cap. Tighten the cap in an
anti-clockwise direction (See Fig.6).
Make sure the cap and blade are
reassembled before storing.
Fig. 6
NOTE:
In order to ensure the
cap does not loosen while
processing, firmly tighten by
turning anti-clockwise.
UNLOCK
LOCK
