background image

4

Kambrook Recommends Safety First

IMPORTANT: Please retain your 

instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any 

consumer product, so that you, our valued customer can confidently 

use and trust our products. We ask that any electrical appliance that 

you use be operated in a sensible fashion with due care and attention 

placed on the following important operating instructions.

Important Safeguards For Your Kambrook 

Steamline Iron

• 

Carefully read all instructions before 

operating the Kambrook Steamline 

Iron for the first time and save for 

future reference.

• 

To protect against electric shock, do 

not immerse the iron, cord or plug in 

water or any other liquid.

• 

Do not use the iron for anything 

other than its intended use.

• 

Always turn the Variable 

Temperature Control to minimum, 

then switch off at the power outlet, 

then unplug the appliance when 

not in use.

• 

Allow the iron to cool completely 

before storing in an upright position 

on its heel.

• 

Do not touch hot surfaces. High 

temperatures are generated during 

use, which could cause burns. 

Always use the handle and warn 

others (especially children) of the 

possible dangers of burns from 

steam, hot water or hot soleplate, 

especially when ironing vertically.

• 

Regularly inspect the supply cord, 

plug and actual appliance for 

any damage. If damage is found 

in any way, or the iron has been 

dropped, immediately cease 

use of the appliance and return 

the entire appliance to your 

nearest authorised Kambrook 

Service Centre for examination, 

replacement or repair.

• 

Store the unit out of reach  

of children.

• 

Do not leave the appliance 

unattended when in use.

• 

The iron must be used and rested on 

a stable surface

• 

When placing the iron on its heel, 

ensure that the surface on which 

the heel is placed is stable.

• 

The iron is not to be used if it has 

been dropped, if there are visible 

signs of damage or if it is leaking.

• 

Do not allow the iron to lay flat on 

the soleplate when stored as water 

may seep through the steam holes, 

if the tank is not empty.

KI730_KI760_KI760P_KI780_IB_FA.indd   4

19/01/10   3:40 PM

Summary of Contents for Steamline KI730

















Reviews: