Kambrook QuikSnaks KSM1CR, Instruction Booklet

Page: 9 / 12

8
Cleaning
Before cleaning, switch the power off
at the power point and then unplug
the power cord.
Allow the Crepe Maker to cool slightly.
The Crepe Maker is easier to clean
when slightly warm.
Always clean your Crepe Maker after
each use to prevent a build up of
baked-on foods.
Wipe cooking plates with a soft
damp cloth to remove food residue.
To remove baked-on food residue,
squeeze some hot water over the
food residue then clean with a non-
abrasive, soft scouring pad. Wipe
clean and dry thoroughly with a soft
clean, cloth.
NOTE:
The cooking plates have
a non-stick coating. Do not use
abrasives or metal utensils to
remove food residue as they will
scratch and damage the coating.
NOTE:
Do not use spray-on
non-stick cooking sprays or
oils as these may affect the
performance of the non-stick
surface on the cooking plates.
WARNING:
Do not
immerse any part of
your Kambrook Crepe
Maker in water or any
other liquid.
Care, Cleaning and Storage
Storage
Switch the Crepe Maker off at the
power point and unplug the power
cord from the power point. Allow to
cool completely.
Follow cleaning instructions and
ensure appliance is completely dry.
Wrap the power cord around the
cord storage area underneath
the appliance.
Store the Crepe Maker on a flat, dry
level surface. Do not place anything
on top of the Crepe Maker.
WARNING: When moving
the Crepe Maker, never
lift the Crepe Maker by
the power cord.