background image

5

Important Safeguards For All  

Electrical Appliances  

•   Carefully read all instructions before operating 

the appliance and save for future reference.

•   Remove and safely discard all packaging 

material and promotional labels before using 

the appliance for the first time.

•   Fully unwind the power cord before use.
•   Do not let the power cord hang over the edge 

of a bench or table, touch hot surfaces or 

become knotted.

•   To protect against electric shock, do not 

immerse the power cord, power plug or 

appliance in water or any other liquid, unless it 

is recommended in the cleaning instructions.

•   The appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, or lack 

of experience and knowledge, unless they 

have been given supervision or instruction 

concerning use of the appliance, by a person 

responsible for their safety.

•   Children should be supervised to ensure that 

they do not play with the appliance.

•   It is recommended to inspect the appliance 

regularly. Do not use the appliance if the 

power supply cord, plug, connector or 

appliance becomes damaged in anyway.  

Return the entire appliance to the nearest 

authorised Kambrook Service Centre for 

examination and/or repair.

•   Any maintenance other than cleaning should 

be performed at an authorised Kambrook 

Service Centre.

•   This appliance is for household use only. 

Do not use this appliance for other than its 

intended use. Do not use in moving vehicles 

or boats. Do not use outdoors. 

Misuse may 

cause injury.

•   The installation of a residual current device 

(safety switch) is recommended to provide 

additional safety protection when using 

electrical appliances. It is advisable that a 

safety switch with a rated residual operating 

current not exceeding 30mA be installed in 

the electrical circuit supplying the appliance.  

See your electrician for professional advice

•   Always turn the appliance to the OFF 

position, switch off at the power outlet 

and unplug at the power outlet when the 

appliance is not in use.

•   Before cleaning, always turn the appliance 

to the OFF position, switch off at the power 

outlet, unplug at the power outlet and remove 

the power cord, if detachable, from the 

appliance and allow all parts to cool.

•   Do not place this appliance on or near a heat 

source, such as hot plate, oven or heaters. 

•   Position the appliance at a minimum 

distance of 20cm away from walls, curtains 

and other heat or steam sensitive materials 

and provide adequate space above and on 

all sides for air circulation. 

•  Always remove the beaters or dough hooks 

from the mixer before cleaning.

•  Care should be taken when removing the food 

from the stainless steel mixing bowl by ensuring 

the motor and the beaters or dough hooks 

have completely stopped before disassembling. 

Ensure the Speed Selector Control is in the 

‘OFF’ (0) position, the Stand Mixer is switched 

off at the power outlet and unplugged before 

unlocking and moving the Stand Mixer motor 

into the upright position. The beaters and dough 

hooks should be released from the Stand Mixer 

motor body before attempting to remove the 

processed food from the mixer bowl and the 

beaters or dough hooks.

•  Always ensure that the Stand Mixer motor 

body is attached to the support arm when not 

in use and before storing.

•  Always ensure that the Speed Selector Control 

is in the ‘OFF’ (0) position, the power is switched 

off at the power outlet and the power cord 

is unplugged from the power outlet before 

attempting to move the Stand Mixer, before 

assembling or disassembling the mixer, when the 

mixer is not in use and before cleaning or storing.

•  Do not move the Stand Mixer whilst in 

operation.

•  Always switch off the Stand Mixer and 

disconnect from the power outlet before 

removing attachments, changing accessories 

or approaching parts that move in use.

•  Do not leave the Stand Mixer unattended 

when in use.

•  Do not place any part of the Stand Mixer in 

the dishwasher or microwave oven.

•  Keep the Stand Mixer clean. Follow the 

cleaning instructions provided in this book.

Summary of Contents for PowerMix KMX200





















Reviews: