13
12
8.
Align and press together the
front and rear grille, ensuring that
the clear plastic clasp is in line
with the LED screen. Securely
snap shut the front and rear
grilles by pressing together at
6 points around the edges of the
grilles (See Fig 13a and b).
Fig. 13a
Fig. 13b
NOTE:
Once the front and rear
grilles have come together
correctly, the Kambrook logo
should be straight.
Using Your Kambrook Pedestal Fan
Continued...
9.
Close and lock the clear plastic
clasp at the bottom of the front
grille over the rear grille rim.
Refit the small screw previously
removed through the screw hole
located at the bottom of the
clear plastic clasp and tighten
securely (See Fig 14).
Fig. 14
Adjustments
Tilting Head Adjustment
Ensure the fan is turned off when
making any adjustments.
To adjust the vertical angle of the fan,
manually tilt the head of the fan to
the desired position.
NOTE:
the head will click as it is
being adjusted.
Height Adjustment
To adjust the height of the fan, loosen
the height adjustment knob at the
rear of the pedestal stand bottom.
Manually adjust to the required height.
Re-tighten the knob when the desired
height has been reached.
The fan is now ready to use.
Control Panel
The main control panel is located on
the fan body, with the LED display just
above it.
The functions available on the control
panel are also available when using
the remote control.
a) Power button ON/OFF button
Press the ‘POWER’ button once to
turn the fan ON.
To turn the fan OFF, press the ‘POWER’
button again, turn off at the power
outlet and remove the plug from the
power outlet.
NOTE:
The fan has a memory
function and will always return to
the same mode and speed it was
set at when it was switched off.
b) Mode button
There are five wind modes for the fan.
The LED screen will indicate which
mode the fan has been set at.
Choose your preferred mode by
pressing the mode key.
Normal Mode
The fan speed stays at the constant
rate it is set at. Increasing the speed
will increase the air flow, whilst
reducing the speed will decrease
air flow.
This is the only mode that allows you
to adjust the wind speed. Refer to
part (c) of this section.
Natural Mode
The fan speed will fluctuate between
various wind speeds to give a more
natural feel to the air flow. The wind
speed self regulates in accordance to
a pre-set program.
To Operate the Kambrook
Pedestal Fan
To operate the fan, plug the power
cord into a 230V or 240V electrical
outlet and switch the outlet on. Be
sure the plug fits tightly as a loose fit
will cause overheating and damage
the plug.
Once the power outlet is switched on,
the fan will beep to indicate the fan is
in ‘Standby’.
NOTE:
The pedestal fan is fitted with
a power saving feature.
When any of the 5 mode types
are selected or the timer function
is set, the LED display panel will
automatically switch off after
30 seconds. To redisplay the current
setting, press the OSC button once.
The fan will also automatically
switch itself off after 12 hours if no
action takes place.
CAUTION:
Never insert
fingers, pencils or any
other objects through the
grille guards whenever the
power plug is connected,
in particular while the fan
is switched on.
NOTE:
To avoid infrared
interference that may trigger
the operation of the cooling
fan, ensure the fan is positioned
away from other infrared remote
controlled appliances.
6 points
