ROASTING AND TOASTING
Position the wire rack on the rack support guide
inside the oven, depending on the height of the
food or according to recipe directions.
Select the required temperature on the
Temperature Control Dial.
Select the ‘MAX’ on the Temperature Control
Dial for toasting or select required temperature
for roasting.
Select top and bottom
elements on the
Element Control Dial.
Preheat the oven. Place the food inside the oven
and select the desired time on the Timer Dial.
The Kambrook Multi-Function Oven will turn off
when the timer turns off.
REHEATING
Position the wire rack on the bottom or top rack
support guide inside the oven, depending on the
height of the pan.
Select bottom only element
on the Element
Control Dial. Select required temperature on the
Temperature Control Dial. Select the desired time
on the Timer Dial.
BAKING
When baking cakes or biscuits, position the wire
rack on the bottom or top rack support guide
inside the oven, depending on the height of the
pan.
Lower oven temperature to between 120˚C-
180˚C.
Select top and bottom elements on Element
Control Dial.
GRILLING
Position the wire rack in the top rack support
guide inside the oven. For grilling use the baking
tray with the grill insert.
Select top only element
on the Element
Control Dial. Select ‘MAX’ setting on the
Temperature Control Dial.
IMPORTANT SAfEGUARDS fOR ALL
ELECTRICAL APPLIANCES.
Fully unwind the cord before use.
To protect against electric shock, do not immerse
the cord, plug or appliance in water or any other
liquid.
Do not let the cord hang over the edge of a
table or counter, touch hot surfaces, or become
knotted.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
It is recommended to inspect the appliance
regularly. Do not use the appliance if the power
supply cord, plug and or appliance becomes
damaged in anyway. Return the entire appliance to
the nearest authorised Kambrook Service Centre
for examination, and/or repair.
Any maintenance other than cleaning should be
performed at an authorised Kambrook Service
Centre.
This appliance is for household use only. Do not
use this appliance for anything other than its
intended use. Do not use in moving vehicles or
boats. Do not use outdoors.
The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using electrical
appliances. It is advisable that a safety switch with
a rated residual operating current not exceeding
30mA be installed in the electrical circuit
supplying the appliance. See your electrician for
professional advice.
BEfORE fIRST USE
Remove and safely discard any packaging
material and promotional labels before using the
Kambrook Multi-Function Oven for the first time.
To eliminate a choking hazard for young children,
remove and safely discard the protective cover
fitted to the power plug of this appliance.
Place the Kambrook Multi-Function Oven on a
level, flat surface.
Plug the appliance into a 230/240-volt power
outlet. Turn the power on.
Set the Temperature Control to 240°C and the
Time Control to 15 minutes. This will eliminate
any oil residue that may have been used for
packing and shipping.
NOTE: When turned on for the first time, the
Kambrook Multi-function Oven may give off vapours
for up to 15 minutes. This is due to the protective
substances on the heating elements. It is safe, not
detrimental to the performance of the Kambrook
Multi-function Oven and will dissipate with use.
Allow the oven to cool. Insert the accessories.
The Kambrook Multi-function is now ready to use.
OPERATING INSTRUCTIONS
IMPORTANT: The oven will not heat until ALL of
the following are activated:
Temperature is selected
The Element Control Dial is turned to top,
bottom or both elements.
Timer is activated, or stay-on function is
selected
NOTE: To turn off the oven, always turn the Timer
to ‘OFF’ position.
THE ELEMENT CONTROL DIAL
The element control dial is able to select the off,
top element only, bottom element only or bottom
and top elements.
•
•
•
TIMER DIAL
To activate the timer, turn the dial to the right
(clockwise). A bell will sound at the end of the
selected time (0-60 minutes).
For setting cooking times less than 30 minutes
– turn the timer dial past the 45 minute mark,
then turn back to the desired time, ie for 10
minutes of cooking, turn the dial to 45 minutes
then immediately turn back to 10 minutes.
STAY-ON fUNCTION
To select the Stay On feature turn the selector to
the left (counter clockwise). The Oven will remain
on until it is manually turned off.
NOTE: Do not leave oven in stay on position for
extended periods of time.
HEATING LIGHT
The light will illuminate as the oven is heating
and will turn off when the oven has reached the
selected temperature ie preheated. It will cycle on
and off throughout the cooking process.
NOTE: The light always turns off when the element
control dial is selected in ‘OFF’ position.
PREHEATING
For the Grill, Bake and Toast functions best results
are achieved by preheating the oven for 5-10
minutes. To preheat the oven, select the desired
oven temperature on Temperature Control Dial.
Select the Function on the Element Control Dial
and select time on the Timer Dial. Once oven is
preheated Heating Light will go out. Place food
into oven and reset timer to desired cooking
time.
CHROME PLATED WIRE RACK
Always place the wire oven rack into top or
bottom Rack Support Guide inside oven in an
upward curved position. This provides two rack
height positions.
Upward curved position
KOT600_MINIOVEN_FA.indd 4-5
10/6/08 1:46:37 PM
