8
Using Your Micathermic Heater
Before First Use
Remove any promotional material or
packaging from the heater.
When unpacking the heater, check
to see you have received the wheels
and wall mounting packs, before
discarding the packaging.
Unwind the cord to its full length and
place the heater on a firm, level
surface in a stable upright position.
Visually inspect the air inlet and outlets
to ensure there are no blockages.
Securing The Heater Wheels
The heater has four wheels and two
wheel brackets that come with a
set of screws. The wheel screws are
located in the wheel pack.
Fig. 1
1.
Insert the screw into the wheel,
ensuring the flat end of the screw
sits between the wheels.
Fig. 2
2.
Line up the screw in the wheels
with those in the base of the
brackets, and secure.
Fig. 3
3.
Turn the heater upside down.
Place the plastic wheel brackets
onto the two perforations, located
at the base of the heater. Ensure
the bracket with the centre hole
(near the centre screw) is placed
on the right hand side of the
heater.
Fig. 4
KMH100_IB_A11_FA.indd 8
14/09/11 1:58 PM
