background image

4

Kambrook Recommends Safety First

IMPORTANT: Please retain your 

instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any 

consumer product, so that you, our valued customer can confidently 

use and trust our products. We ask that any electrical appliance that 

you use be operated in a sensible fashion with due care and attention 

placed on the following important operating instructions.

Important Safeguards For Your Kambrook  

Micathermic Heater 

•  Carefully read all instructions before 

operating the Heater and save for  

future reference.

•  Remove any packaging material and 

promotional stickers before using the Heater 

for the first time.

•  Connect only to a 230V or 240V  

power point.

•  Avoid touching the heater body while it is on, 

as some parts of the heater are hot. When 

moving the unit switch off and hold the heater 

by the handles where provided. 

WARNING:

 In order to 

avoid overheating, do 

not cover the heater.

•  Extreme caution and supervision is necessary 

when this heater is used by or near children or 

invalids.

•  Extreme caution and supervision is necessary 

when this heater is used near animals.

•  Do not mount on ceiling.
•  Do not leave the heater unattended. Always 

switch off the heater at the controls and at 

the power outlet then unplug from the power 

outlet when not in use.

•  Do not use heater to dry your laundry.
•  Do not operate heater whilst asleep.

•  Do not operate any heater with a damaged 

cord or plug, or if the heater has been dropped 

or damaged in any manner. Return the heater 

to your nearest Kambrook Service Centre 

for examination, electrical or mechanical 

adjustment or repair.

•  Do not use outdoors. This heater is not 

intended for commercial use, such as 

construction sites.

•  Do not locate the heater immediately below 

and in front of a socket outlet when in use.

•  Do not use this heater with an external 

programmer, timer or any other device that 

switches the heater on automatically. Since 

a fire risk may exist if the heater is covered or 

positioned incorrectly.

•  This heater is not intended for use in wet or 

moist locations. Do not immerse or allow liquids 

to be spilt on the heater.

•  Do not use this heater in the immediate 

surroundings of a bath, a shower or a 

swimming pool.

•  This heater has hot and arcing or sparking 

parts inside. Do not use in areas where 

petrol, paints, aerosols, or other inflammable 

substances are used or stored.

•  Do not operate the heater with the power cord 

damaged, frayed or split, wound around any 

part of the heater, or in contact with heated 

surfaces of the heater.

KMH100_IB_A11_FA.indd   4

14/09/11   1:58 PM

Summary of Contents for KMH100

















Reviews: