Kambrook KKE760CLR, Instruction Booklet

Page: 11 / 12

10
WARNING: Ensure the
kettle and water has
cooled down before
attempting to clean the
filter and appliance.
WARNING:
Do not place
a load on the top of the
glass kettle or knock the
glass on a hard surface
or drop the kettle. The
glass may break. Always
take care cleaning or
filling the kettle.
Mineral Deposits and
Discolouration
Due to the large surface area of
the concealed element (interior
base), discolouration due to mineral
deposits from tap water may appear
more obvious by leaving a brown
stain on the base. THIS IS NOT RUST.
To remove the discolouration, follow
the instructions below ‘Removing
Mineral Deposits’.
Removing Mineral Deposits
Mineral deposits in tap water may
cause the kettle interior to discolour
over time. This may be removed by
using a proprietary kettle descaler
which is available from most leading
supermarkets, department stores and
hardware stores.
Care, Cleaning and Storage
Continued...
Alternatively:
1. Fill the kettle until
2
⁄
3
full with 1 part
vinegar (or a few slices of lemon)
and 2 parts water, bring to the
boil and allow to stand overnight.
2. Empty the solution from the kettle.
Fill the kettle with clean water,
bring to boil and discard the
water. Repeat and the kettle will
be ready for use.
Storage
Ensure the kettle is switched off,
cleaned and dried before storing.
Ensure that the lid is closed and
locked firmly into place. Wrap the
power cord around the cord storage
under the power base. Stand the
kettle upright on the power base.
Do not store anything on top.