Kambrook KFP90, Manual

Page: 8 / 28

8
Turn the lid clockwise – moving the ‘lid
locking tab’ into the slot near the top of
the motor unit - until the indicator line on
the lid is aligned with the circle
on the
top of the bowl.
A “click” sound will be heard, to indicate is
correctly fitted.
NOTE:The Food Processor Deluxe will not operate
unless the processing bowl, lid and blender drive
cover are correctly locked into position.
Ensure the speed dial is in the Off (0)
position.
Plug into a 230/240 volt power outlet.
Turn power on.
The processor is now ready to use.
To begin processing/slicing/grating turn the
‘Power Control Dial’ from the Off (0)
position to either the Low (1), Medium (2)
or High (3) speed, depending your
requirements.The speed can be changed
at any time during the process.
For short bursts of power, whilst
processing, use the “PULSE” setting.
For slicing and grating – ensure that
the food items you want to slice or grate
are of a suitable size to be feed through
the food chute.
Place the food inside chute and push
down with the ‘food pusher’.
NOTE! : Never push down any foods with your
hands and do not put your hands down the food
chute at any time during processing.
For using the processing blade: – with
the ingredients inside the processor bowl,
start the unit on low speed (1) moving to
higher speeds (2 or 3) if necessary. Before
commencing ensure that the ‘food pusher’
is in place to avoid splashing from the food
chute. Ingredients can be added through
the food chute whilst processing.
If ingredients stick to the sides of the
processor bowl during processing, turn
the speed to the Off (0) position, switch
off at the power outlet, remove lid and
then push the food back onto the blades
using the plastic spatula to scrape down
the sides of the bowl.Then recommence
processing.
NOTE: Do not over fill the processor bowl past the
MAX line for solids and past the 750ml mark for
liquids. For greater quantities of liquids the blender
jug should be used.
✔
Lid
locking
tab
Insert
slot