Kambrook KCT110, Instruction Booklet

Page: 11 / 16

11
Mineral Deposits and
Discolouration
The concealed element in the base of
the is made from high quality stainless
steel. Any brown stains appearing are
the result of mineral deposits and are
not rust.
To remove the discolouration follow
the cleaning instructions “Removal of
mineral deposits”.
Removal of Mineral Deposits
Mineral deposits in tap water may
cause the Kambrook Electric Teapot
interior to discolour over time. This
may be removed by using a kettle
cleaner or descaler which is available
from most leading supermarkets,
department and hardware stores.
Alternatively:
1. Fill the Kambrook Electric Teapot
until
2
⁄
3
full with 1 part vinegar and
2 parts water. Boil and allow to
stand overnight.
2.
Empty the solution from the
Kambrook Electric Teapot. Fill the
Kambrook Electric Teapot with
clean water, bring to the boil and
discard the water.
3.
Repeat and the Kambrook
Electric Teapot will be ready
for use.
Storage
Ensure that the Kambrook Electric
Teapot is switched off, cleaned and
dried before storing. Ensure that the lid
is closed and locked firmly into place.
Wrap the power cord around the
cord storage under the power base.
Stand the Kambrook Electric Teapot
upright on the power base. Do not
store anything on top.
KCT110_IB_FA.indd 11 6/11/09 1:26 PM