background image

10

Safety Features

Safety Tip-Over Cut-Out Switch

There is a tip-over switch fitted 

inside the heater. If the heater is 

accidentally tipped over, it will 

automatically turn off. Once the 

heater is placed back into an upright 

position, it will resume heating again.

ThermoGuard Overheating 

Safety Device

Your heater is fitted with a safety 

device that switches off the heater 

in the event of overheating. Should 

this heater stop working, turn off the 

heater and inspect the air inlet and 

outlet for blockages. Wait until the 

unit is fully cooled for the protection 

system to rest before attempting to 

restart the heater.
If the heater fails to operate or the 

safety device switches off again. 

Return the heater to your nearest 

service centre for examination  

or repair.

 

WARNING:

 In order to 

avoid overheating, DO 

NOT COVER the heater

Using Your Kambrook Heater 

continued

Hints/Tips to Retain Heat  

in Your Home

• 

Don’t overheat your home. The 

temperature of a heated room in 

winter should be 18–21°C.

• 

Your heater will work more 

efficiently if you stick to Kambrook’s 

recommended clearance spaces. 

• 

Choose the right size heater for the 

room type you want to heat.

• 

Zone off unoccupied rooms by 

closing doors and only heat the 

main living areas.

• 

Fit window coverings like curtains  

to halve winter heat loss.

• 

Put draft stoppers, such as a rolled 

up towel, at the bottom of outside 

doorways to keep out cold air.

• 

Keep the heat in and the cold 

out by installing wall and ceiling 

insulation.

• 

Avoid placing items too close to the 

heater (both at the front and back) 

for optimal air flow.

Summary of Contents for KCE85













Reviews: