background image

5

4

Kambrook Recommends Safety First

IMPORTANT: Please retain your 

instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any 

consumer product, so that you, our valued customer, can confidently 

use and trust our products. We ask that any electrical appliance that 

you use be operated in a sensible fashion with due care and attention 

placed on the following important operating instructions.

Important Safeguards For Your Kambrook  

Ceramic Heater

•  Carefully read all instructions before 

operating the Kambrook Ceramic Heater for 

the first time and save for future reference.

•  Always ensure the heater is properly 

assembled before use.  Follow the 

instructions provide in this instruction book.

•  Remove and safely discard any packaging 

material and promotional labels before using 

the heater for the first time.

•  To eliminate a choking hazard for young 

children, remove and safely discard the 

protective cover fitted to the power plug of 

this heater.

•  Avoid touching heater body while it is on 

as some parts of the heater are hot. When 

moving the heater, switch OFF and hold the 

heater by the handle provided.

•  Keep combustible materials such as drapes 

and other furnishings at least 1.7 meters from 

the front, sides and rear of the heater.

•  Extreme caution and supervision is necessary 

when this heater is used by or near children, 

invalids or animals.

•  Children should be supervised to ensure that 

they do not play with the heater.

•  Do not use this heater in the immediate 

surroundings of a bath, a shower or a 

swimming pool. Do not immerse or allow 

liquids to be spilt on heater.

•  Do not use the heater to dry your laundry.

•  This heater has hot and arcing or sparking 

parts inside. Do not use in areas where 

petrol, paints, aerosols, or other inflammable 

substances are used or stored.

•  Do not allow materials that have been in 

contact with oil, petroleum based products 

or drying fluids to come in contact with the 

heater.

•  Do not operate the heater on an incline 

plane. Do not leave while the heater is 

switched on.

•  Do not leave the heater unattended. Always 

switch the heater OFF at the controls and at 

the power outlet then unplug heater from 

the power outlet when not in use.

•  Do not operate heater whilst asleep.
•  Do not operate the heater with a damaged 

cord or plug, or if the heater has been 

dropped or damaged in any manner,  

return the heater to your nearest Kambrook 

service centre for examination, electrical or 

mechanical adjustment or repair.

•  Do not operate the heater with the power 

cord damaged, frayed or split, wound 

around any part of the heater, or in contact 

with heated surfaces of the heater.

•  Do not run the cord under carpeting or 

cover the cord with rugs, runners or the like. 

Arrange the cord away from traffic areas 

and where it will not be tripped over.

•  Do not locate the heater immediately below 

socket outlet when in use.

•  Do not use this heater with a programmer, 

timer or any other device that switches the 

heater on automatically since a fire risk may 

exist if the heater is covered or positioned 

incorrectly.

•  This heater is not intended for use in wet or 

moist locations.

•  To disconnect heater switch the power  

switch to OFF, then switch off at the power 

outlet then remove plug from the outlet.

•  Do not insert or allow foreign objects to pass 

through the inlet or outlet openings. This may 

cause an electric shock, fire or damage the 

heater.

•  To prevent a possible fire or heat damage, 

allow ample space around the heater (at 

1.7m at front and 0.5m at the rear, top and 

sides) and do not totally or partially block the 

air inlet or outlets in any manner. Check the 

openings from time to time for accumulated 

dust. Ensure long shag carpet does not 

obstruct airflow under the unit.

•  Do not touch hot metal surfaces.
•  Switch the heater to OFF, then turn off at the 

power outlet and unplug. Allow heater to 

cool down before cleaning or storing.

•  Do not operate the heater on a sink or drain 

board.

•  To avoid an electrical overload, it is 

recommended that no other appliances 

are plugged into the same circuit as your 

ceramic heater when it is in use.

•  Do not move the heater when it is switched 

on.

•  Do not use outdoors. This heater is not 

intended for commercial use such as 
construction sites.

•  Use this heater only as described in this 

instruction manual. Any other use not 

recommended by the manufacture may 

cause fire electric shock or injury and voids 

all warranties.

•  Regularly inspect the supply cord, plug, 

control settings, air inlets and outlets and 

main housing for any damage, If found 

damaged in any way, immediately cease 

use of the heater and return to Kambrook or 

an authorized service agent for inspection 

or repair.

•  To disconnect the heater, switch the heater 

control dial to OFF, then switch off at the 

power outlet and remove the plug from the 

power outlet.  Allow the heater to cool down 

before cleaning and storing.

•  Keep the heater clean. Follow the cleaning 

instructions provided in this book on  

(page 13). 

NOTE:

 This heater features a 

tip-over switch. If the heater tips 

over, it will automatically switch 

off. Once placed back in the 

upright position, the heater will 

automatically switch on again.

WARNING:

 In order to 

avoid overheating, do 

not cover the ceramic 

heater.

Summary of Contents for KCE460 Series









Reviews: