9
IMpORTANT:
If the iron is
set to a low temperature
on the temperature
control (i.e. Synthetic or
Silk) and also on any
of the steam control
settings, there may
be leakage from the
soleplate. This is due to
the iron temperature not
being high enough to
vaporise the water and
create steam.
Therefore, ensure
that the steam
control is always set
to correspond with
the setting on the
temperature control
as seen in Table A (see
section ‘Setting the
Temperature’).
Summary of Contents for DURAGLIDE KI820
Page 1: ...DuraGlide Anodized Iron KI820 Instruction Booklet ...
Page 14: ...14 Notes ...
Page 15: ...15 Notes ...
