background image

4

Kambrook Recommends Safety First

IMPORTANT: Please retain your 

instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any 

consumer product, so that you, our valued customer can confidently 

use and trust our products. We ask that any electrical appliance that 

you use be operated in a sensible fashion with due care and attention 

placed on the following important operating instructions.

IMPORTANT SAFEGUARDS FOR YOUR KAMBROOK 

CAPTIVG3 CYClONIC BAGlESS VACUUM

•  Carefully read all instructions before operating 

the Kambrook CaptivG3 Cyclonic Bagless 

Vacuum for the first time and save for future 

reference.

•  To protect against electric shock, do not 

immerse the vacuum, cord or plug in water or 

any other liquid.

•  Ensure that the power source to be used is 

the same as the voltage requirements of the 

product.

•  Always switch vacuum cleaner to off, then 

switch off at the power outlet, and then 

unplug the vacuum cleaner when not in use 

and prior to cleaning the dust container or 

filters.

•  Never use the vacuum cleaner without a dust 

container and motor protection filter in place.

•  Never use the vacuum cleaner to vacuum hot 

ashes, broken glass, sharp objects or liquids.

•  Never use in the presence of explosive liquids 

or vapours.

•  Never vacuum up inflammable or poisonous 

liquids such as petrol, copier toner or other 

volatile substances. Never vacuum up acids, 

asbestos or asbestos dust.

•  Do not leave the vacuum cleaner unattended 

when in use. Young children should be 

supervised to ensure that they do not play with 

the vacuum cleaner.

•  Close supervision is required at all times when 

operating the vacuum cleaner near children.

•  This vacuum cleaner is suitable for domestic 

use only. Do not use this vacuum cleaner for 

anything other than its intended use.

•  Do not use or store outdoors.
•  Fully extend the cord (to the yellow tape 

mark) whenever the vacuum cleaner is in use. 

Please ensure that the cord is not extended 

past the red tape mark.

•  Do not leave the appliance unattended when 

in use.

•  Regularly inspect the supply cord, plug and 

actual appliance for any damage.  

If damage is found in any way, immediately 

cease use of the vacuum and return the entire 

vacuum to your nearest authorised Kambrook 

service centre for examination, replacement  
or repair. 

KBV250-220-280_IB_B11.indd   4

23/08/11   10:12 AM

Summary of Contents for CaptivG3 KBV220

















Reviews: