Boilie Cannon - User's Manual
11
Once you have determined actual boilie diameter, follow this simple
procedure to setup Boilie Cannon for your boilies:
1.
Turn off device
2.
Locate three adjustment holes by looking through boilie diameter
adjustment opening while slowly rotating disc by hand through
boilie ejection opening.
3.
Insert or relocate supplied screw (M3 x 26 mm) based on your
previously determined boilie size. Use supplied screwdriver. Black
dot on the image above represents location of the screw for given
boilie diameter. For boilies between 21,5 and 23,0 mm, screw
should be taken out from the device.
Boilie Cannon comes supplied with four adjusting screws. For configuring
your boilie diameter use only one screw (or no screw if using boilies from
Screw loacation
for boilies from
19 to 21,5mm
Screw loacation
for boilies from
16,5 to 19,0mm
Screw loacation
for boilies from
15,0 to 16,5mm
Boilie insertion
opening
Boilie
diameter
adjustment
opening
Summary of Contents for Boilie Cannon
Page 1: ...User s Manual January 2021...
Page 2: ......
