Boilie Cannon - User's Manual
10
Boilie diameter setup
Boilie Cannon can eject boilies with diameters ranging from 15 mm to 23
mm (0,6" to 0,9"), but before use it has to be prepared for actual diameter
of you boilies by inserting adjusting screw to corresponding position.
For measuring diameter of your boilies, use supplied Boilie diameter gauge.
Boilie diameter gauge is illustrated on the picture below.
To determine actual diameter of your particular boilies, follow this simple
procedure:
1.
Try inserting boilie through the most left hole - if boilie drops
through the hole, your boilies are too small (less than 15mm) and
should not be used with Boilie Cannon.
2.
Try inserting boilie through the next hole, moving to the right. If
boilie drops through the hole, then you have found your boilie
diameter. If not, continue with step 2 (left to right) until you find a
smallest hole that your boilie can pass through.
3.
Once you have found your boilie diameter, set the adjustment
screw to appropriate position, according to the illustration on the
picture above.
4.
If boilie cannot pass through the biggest hole (the most right), then
your boilies are too big (more than 23mm) and should not be used
with Boilie Cannon.
Summary of Contents for Boilie Cannon
Page 1: ...User s Manual January 2021...
Page 2: ......
