DEVICE SPECIFICATION
APPLICATION OF THE APPLIANCE
The pneumatic lubricator is driven by compressed air. The high-density
grease is forced by the high pressure that is produced by the piston pump.
Pneumatic grease guns are one of the most commonly used tools of this
type in industry and production. These devices are reliable, have low air
consumption and their working pressure is precisely matched. In addition,
they are easy to use, very efficient and, what's the most important, they
extend the operating time of the parts subject to friction in large and
heavy vehicles. Lubricator is widely used in cars, tractors and many
industrial machines.
LIST OF ACTIONS BEFORE YOU BEGIN
1.
Unclip the latches and remove the protective cover.
2.
Enter the selected lubricant into the tank.
3.
Put the protective cover tightly and fasten the clips.
4.
Make sure that the compressor is turned off and then
connect the air hose to the lubricator.
5.
Start the compressor.
6.
The device is ready to work.
LIST OF OPERATIONS WHILE WORKING WITH THE DEVICE
1.
Point the gun with the grease to the desired location.
2.
Apply grease.
3.
Turn off the compressor and unhook the air hose from the
lubricator.
4.
Clean the gun and work area.
MAINTENANCE OF THE APPLIANCE
1.
Make sure that no water gets into the container behind the
grease, as this will cause corrosion.
2.
For better protection of the device against damage, install an
air filter to prevent impurities from entering the pump.
WARNING!
1.
The grease gun works under high pressure, so do not aim the
gun at people or animals.
2.
During operation, the device must be under the constant
supervision of the operator.
3.
After finishing work, turn off the compressor and disconnect
the hose from the grease gun.
Model
S1904
Tank capacity
12L
Efficiency
0,85L/min
Air consumption
130L/min
Input pressure
0.6 - 0.8Mpa
Output pressure
30 - 40Mpa
Pressure ratio
50:1
Noise level
85dBA
Net weight
11,9kgs
