34
Latch Adjustments
CLASSIC & BIG JOE
To tighten and loosen the latch, use a small allen wrench to
adjust the set screw (right to tighten, left to loosen).
Safety Information
HINGE
Do not attempt to disassemble the hinge from your grill.
If attempting to use the hinge as a lifting point, grasp the hinge
near the mounting point and/or bands, not the bottom.
GASKET
Self-cleaning through natural heat cycle recommended. Do
not use chemical based cleaners on the gasket. If absolutely
necessary, gently wipe off any spills or moisture. Do not scrub or
abrade the gasket if cleaning. Excessive rubbing can cause wear.
The latch on your Kamado Joe Classic is already preset for
an ultra-tight seal. Use these instructions if any adjustments
should be needed.
ADJUSTMENTS
Summary of Contents for CLASSIC III KJ15040721
Page 43: ......
