4
assemBling your Kamado Joe “sTand alone” grill and inserTing
iT inTo your Kamado Joe grill TaBle
1. Follow steps 1 and 3 on the previous page, then attach the
bamboo handle with the nuts (included) and a 10mm wrench.
2.
Open the lid and place the thermometer sensor through the
small hole on the front of the lid. Slide the washer and nut onto
the sensor and turn the nut finger tight. Adjust the position of
the thermometer so it is upright, then tighten the nut with a
14mm wrench. do not over tighten.
3.
Place the three grill feet on the bottom shelf of the grill table
and center them using the hole in the top shelf as a guide.
Form a triangle
s
with the top being where the back of the grill
will be placed. The other two feet should be placed just to the
left and right of the bottom draft door (See page 25).
4.
Gently place the grill into the table and adjust the feet. Be
careful not to catch the bottom draft door handle on the edge
of the hole to avoid damaging the handle or grill table surface.
we highly recommend that two people lift the grill into the
grill table due to the weight of the grill.
5.
Follow steps 5 through 9 on the previous page.
Kamado Joe ComponenTs
FIRE BOX
BASE
LID
TEMP
GAUGE
CAST IRON
FIRE GRATE
FIRE RING
GRILLING
GRATE
SPRING
HINGE
BAMBOO
HANDLE
CAST IRON
TOP VENT
STAINLESS
STEEL DRAFT
DOOR
