Channel mode
- choose A001 as the default address code.
1. DMX512 address setting (Addr)
Select
Addr
in the Function Menu and press the
Enter
button to confirm. Using the
Up/Down
buttons, select your initial address
and press the
Enter
button to confirm. Press the
Menu
button to return to the main menu or wait 10 seconds and this will happen
automatically.
2. Channel mode (Chnd)
Select
Chnd
in the Function Menu and press the
Enter
button to confirm. Using the
Up/Down
buttons, select a channel (e.g.
6Ch
which is 6 channel mode) and press the
Enter
button to confirm your choice (6, 12, 14 or 27). Press the
Menu
button to return to
the main menu or wait 10 seconds and this will happen automatically.
3. Master/Slave mode (SLnd)
Select
SLnd
in the Function Menu and press the
Enter
button to choose between
NASt
(Master mode) or
SL1
(Slave 1 mode) or
SL2
(Slave 2 mode). Press the
Enter
button to confirm your choice. Press the
Menu
button to return to the main menu or wait 10
seconds and this will happen automatically.
4. Show mode (Shnd)
Select
Shnd
in the Function Menu and press the
Enter
button to confirm. Using the
Up/Down
buttons, select a show (e.g.
Sh0 -
random show,
Sh1
- show 1,
Sh2
- show 2 and so on) and press the
Enter
button to confirm your choice. Press the
Menu
button
to return to the main menu or wait 10 seconds and this will happen automatically.
5. Sound-to-Light mode (SoUn)
Select
SoUn
in the Function Menu and press the
Enter
button to confirm. Using the
Up/Down
buttons, select either
ON
or
OFF
and press the
Enter
button to confirm your choice. Press the
Menu
button to return to the main menu or wait 10 seconds and this
will happen automatically.
6. Sound-to-Light microphone sensitivity (SenS)
Select
SenS
in the Function Menu and press the
Enter
button to confirm. Using the
Up/Down
buttons, select a microphone
sensitivity setting (from 0-100)
and press the
Enter
button to confirm your choice. Press the
Menu
button to return to the main
menu or wait 10 seconds and this will happen automatically.
7. LED display setting (Led)
Select
Led
in the Function Menu and press the
Enter
button to confirm. Using the
Up/Down
buttons, select either
ON
or
OFF
and press the
Enter
button to confirm your choice. Press the
Menu
button to return to the main menu or wait 10 seconds and this
will happen automatically.
8. LED display inversion (dISP)
Select
dISP
in the Function Menu and press the
Enter
button to confirm. Choose either
dISP
which is the normal display setting
or
dSIP
which rotates the display 180 degrees (inverts). Press the
Menu
button to return to the main menu or wait 10 seconds
and this will happen automatically.
9. Y axis position (tLtl)
Select
tLtl
in the Function Menu and press the
Enter
button to confirm. Using the
Up/Down
buttons, select either
NO
(the first
row, Y axis position) or
YES
(the first row, Y axis reverse position) after choosing press the
Enter
button to confirm your choice.
Press the
Menu
button to return to the main menu or wait 10 seconds and this will happen automatically.
10. Test mode (teSt)
Select
teSt
in the Function Menu and press the
Enter
button to confirm. The LED display will flash and the unit will run a built-in
self-test program. Press the
Menu
button to return to the main menu or wait 10 seconds and this will happen automatically.
11. Working time (hour)
Select
hour
in the Function Menu and press the
Enter
button to confirm. The LED display will show the working time of the unit.
Press the
Menu
button to return to the main menu or wait 10 seconds and this will happen automatically.
12. Software version (uer)
Select
uer
in the Function Menu and press the
Enter
button to confirm. The LED display will show the software version. Press the
Menu
button to return to the main menu or wait 10 seconds and this will happen automatically.
13. Auto-reset function (rSet)
Select
rSet
in the Function Menu and press the
Enter
button to confirm. The unit will auto reset. Press the
Menu
button to return
to the main menu or wait 10 seconds and this will happen automatically.
Summary of Contents for VECTOR6
Page 4: ...LED Function menu...
