Kaltech KL-H01, User Manual

Page: 24 / 40

Once you are finished cleaning, wipe away any
remaining moisture and stains from the product with a
towel or cloth. When you are finished wiping,
reassemble the product. For more information about
reassembly, see “Assembling the main unit” on page 7.
10. Reassemble the product. ９ . Remove the pre-filter and wipe away any dirt
on it with a standard sponge or soft cloth.
The dedicated cartridge is a consumable part (sold separately). The operation indicator lamp and smart bar will
indicate when it is time to replace it. To purchase a new dedicated cartridge, please contact your local distributor.
https://kaltech-global.com
Press and hold the humidification button to reset the cartridge replacement warning. See “Indicator lamps” on page 14.
If you fail to replace the cartridge soon enough, the product may fail to function effectively.
Note: Follow the disposal guidelines in your community when disposing of used cartridges. If the disposal
guidelines are unclear, dispose of the cartridges as noncombustible waste.
There’s no need to change the water while the power is on since the photocatalyst function purifies it. If the
product has not been turned on for at least 1 day, the water in the main unit will need to be changed.
Replacing the dedicated cartridge
(Rough guide: If the product has been used 5 hours per day, replace the cartridge after approx. 4 months.
Note: Varies with frequency of use and water quality in the area where the product is being used.)
Changing the water (Rough guide: When the product has not been turned on for at least 1 day)
Note: Avoid applying excessive pressure
to the surface of the pre-filter.
Pull the pre-filter out from the
side of the main unit while
keeping it level.
If you notice any unusual odor from the mist before the white blinking light for replacing the dedicated cartridge, please replace
the cartridge and use softened water thereafter, especially since the cartridge is likely to be worn out due to high hardness.
23