Kaltech KL-H01, User Manual

Page: 15 / 40

Brightness sensor
Indicator lamps
The main unit’s smart bar lamp and operation indicator lamp turn on and flash as follows:
*1 The smart bar lamp will also flash orange when using the product for the first time and when using it for the first time after an extended period of non-use.
*2 Pressing the Humidity button when the product is out of water (when the indicator lamp is slowly flashing orange) will activate the standby operation,
causing mist generation to start automatically once water purification is complete.
*3 Press and hold the Humidity button to reset the cartridge replacement warning. (See “Replacing the dedicated cartridge” on page 23.)
Adding water
• Add a sufficient amount of water before starting the humidification operation for an extended period of time, for example
when sleeping, or when using the off-timer.
• If the main unit runs out of water the during humidification operation, the operation indicator lamp and the smart bar lamp
will flash orange to alert you. For more information about how to add water, see “Adding water to the smart bar” on page 15.
Brightness sensor
The brightness sensor dims the smart bar’s lamp
when the surrounding area is dark.
Turning off the smart bar lamp
Press and hold the off-timer button to turn off the smart bar lamp.
Press and hold the button again to turn the lamp back on.
Product behavior Operation indicator lamp Smart bar lamp Photocatalyst LED
Power off
Power on (no mist)
Power on (mist)
Out of water*
1
Standby start*
2
Cartridge replacement warning* 3
Error
Off
Off
On (blue)
Flashing slowly (orange)
Flashing (blue)
Flashing (white)
On (red) Off
On (blue)
On (blue)
On (blue)
On (blue)
On (blue)
Off
Off
Off
On (blue)
Flashing slowly (orange)
Flashing (blue)
Flashing (white)
Flashing slowly (red)
14