Maintenance & Cleaning
To enjoy years of outstanding performance
from your appliance, regular service of the
appliance is mandatory as follows:
• The appliance should be inspected at
least one time a year by a qualified service
engineer only. More frequent cleaning
may be required according to the use of
the appliance.
• Any guard or other protective device
removed for servicing the appliance must
be replaced before operating it.
• Keep exterior surfaces clean, free and clear
from combustible materials.
• Use warm soapy water for cleaning. Never
use flammable or corrosive cleaning
agents.
• While washing your unit makes sure
to
keep the area around the burner
assembly dry at all times.
If the gas control
is exposed to water in any way,
DO NOT
try to use it. It must be replaced.
• Burner and LPG compartment circulating
air passageways of the appliance must be
kept clean.
• Airflow must be unobstructed. Keep
controls, burner and circulation air
passageways clean. Signs of possible
blockage include:
• If the flame is uneven, making poping
noises or is burning yellow there is not
ample oxygen getting to the flame.
Extinguish the flames and ensure the
burners or ventilation are not blocked and
are free from dust or debris.
• Spiders and insects can nest in burner
or orifices. This dangerous condition can
damage the appliance and render it unsafe
for use. Clean burner holes by using a
heavy duty pipe cleaner. Compressed air
may help clear away smaller particles.
• Carbon deposits may create a fire hazard. If
any carbon deposits develop, clean fire pan
with warm soapy water.
• After the burner and lava rocks are
completely cooled down, remove it from
the bowl and use a soft brush to remove
any marks, loose dirt. Wipe with a soft cloth.
• Clean the bowl and afterward put lava
rocks again in proper position.
• For proper cleaning, a vacuum cleaner can
be used.
Note:
In a salt-air environment (such as
near the sea), corrosion occurs more quickly
than normal. Frequently check the corroded
areas and repair them promptly. Stubborn
stains, discoloration and possibly rust pitting
can occur from exposure to harsh outdoor
conditions. Be careful not to let any powder
or solvent come in contact with painted or
plastic components as damage may occur.
After long use, some discoloration can come
up and it screen is normal.
Make sure both gas supplies are in the off
position before changing the battery. Please
refer to the process of assembling battery.
Please contact the Manufacturer or dealer for
information regarding replacement hoses,
thermocouples, igniters, lava rocks, etc.
Attention:
Never use unauthorized parts or
component for this appliance.
Use only original equipment replacement
spare parts and components.
Failure to comply with the above may result
in hazardous conditions and your warranty
being void.
