background image

Important Information

Important advice before you begin:

This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental capabilities 
or lack of experience and knowledge if they have been given 
supervision or instruction concerning use of the appliance in a 
safe way and understand the hazards involved. 

Children should not play with the appliance. 

Cleaning and user maintenance should not be made by children 
without supervision.

Do not use any other tools other than those recommended to 
build this product.

Please do not use substitute parts. Use only additional or 
replacement parts supplied by Kettler.

 In the unlikely event that this product has missing or damaged 
parts, please visit our website 

www.kettler.co.uk/shop.

   Unpack the halogen heater making sure that all the items are present and that 

there are no components left in the box and that the heater head is free from any 
packing material.

   Using the detailed drawing follow the steps to assemble your heater.

 

 DO NOT

 connect the heater to the electrical supply until all the 

assembly is complete.

  

DO NOT

 connect the heater to the electrical supply if any of the components or the 

power cord is damaged in any way.

If in doubt contact your supplier.

Summary of Contents for KLEH111-0200










Reviews: