Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.
Print only
what is inside the frame.
4
SC 41501 - 120501
Assembly page 4/28
Fax +1 305 430 9692
touch the water while the appliance is still plugged into the
power outlet!
3.
If the unit stops working properly, disconnect it from the power
supply. Do NOT attempt to repair the malfunctioning unit unless
you are a qualified electrician.
4.
Lift the lid carefully and away from your face to avoid scalding.
Allow water to drip into the cooking pot.
5.
Always place the unit on a heat resistant surface.
6.
Be sure to unplug the power cord when the inner pan is not in the
cooker, or when cooker is not being used. Remember that the
"Keep Warm" feature only operates when the power cord is
plugged in.
7.
Always place the inner pot inside the cooker before operating.
Turn the pot gently to the right and left to make sure that the
inner pot is fully inserted.
8.
Place the lid on your inner pot while cooking. Keep the lid in
place after serving to prevent your rice from drying out or
discoloring.
9.
Keep the bottom of the inner pot and the surface of the heating
plate free of foreign matter to prevent operating malfunctions.
10.
The rice should not be left in the rice cooker with the keep warm
function on for more than 24 hours.
11.
To prevent damage or deformation, do not use the inner pot on
a stovetop or burner.
12.
Caution: to protect against damage or electric shock, DO NOT
cook in the base unit, but only in the cooking pot provided!
POLARIZED PLUG INSTRUCTIONS
This appliance is equipped with a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this plug will fit
into the polarized outlet only one way. If the plug does not properly
fit into the outlet at first, reverse it. If it still does not fit, contact a
competent qualified electrician.
Do not attempt to modify the plug in
any way
.
