Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.
Print only
what is inside the frame,
6
EKS 39724 - 120501
Assembly page 6/28
Fax +1 305 430 9692
WEIGHING
1)
Place the stainless steel bowl (if used) in place on the scale, before
turning on the scale.
2)
Switch the scale on using the on/off switch situated on the top of the
control panel. LCD screen will initialize.
3)
The scale will turn on and the LCD display will show “0 g” or “0:0.0
lb:oz.”.
4)
Put the object you want to weigh on the scale. The stabilized weight
is displayed. In the imperial weighing mode, the weight is indicated
in US pounds (lb.), US ounces (oz.) and tenth of ounces. (for example
the weight display 2:3.2 means 2 lb., 3Oz. and 2/10 oz.).
5)
Remove the object from the platform.
6)
The scale turns off automatically after 30 seconds. You can also
switch the scale off anytime by keeping the on/off switch pressed.
7)
If the scale goes off automatically, press on the ON/ZERO button to
switch on again.
THE TARE FUNCTION
The tare function is extremely useful to calculate the weight of ingredients
that cannot be put directly on the platform. For
example flour, or liquids, which require a
container before weighing, or for weighing
ingredients that are added after the first
weighing, without having to remove the initial
product.
In order to use this function, proceed with the first
weighing, let the weight stabilize, and then press
the “On/Zero” button above the LCD display.
The scale will reset, display a “T” at the lower left
corner, and indicate now 0g or 0:00.0 lb:oz. Add
the new ingredient to weigh. The weight
indicated on the display is the weight of the
ingredient added after the reset to zero!
Note: When you remove the container from the platform, the LCD display
will show the weight as negative (“-” will appear on the left-hand side). To
reset, press “On/Zero” again.
Press
“On/Zero”