33
EN
Menu 05 - stand-by mode
Press the SET key. Using the key
(2), go to
menu 05 and confirm with the SET key. Using the
key
(1) choose whether to enable (ON) or
disable (OFF) the stand-by function.
Press the ON/OFF key (4) to exit.
If enabled, the device will go to stand-by once the
set temperature has been reached.
FOR AIR STOVES ONLY:
In the presence of an
external thermostat, to go to stand-by mode, both
the external thermostat and the ambient probe on
the stove must be satisfied.
off
Menu 05
mode
Stand-By
menù level
Menù 06 - buzzer mode
It allows you to enable or disable the acoustic
buzzer on the controller.
OFF
Menu 06
mode
Buzzer
Menù 08 - stove status
Displays the work status.
OFF
Menu 08
state
stove
menù level
Menù 07 - start load
This function is only available in OFF and allows
you to load the screw feeder on first start-up,
when the pellet tank is empty.
Having selected Menu 7, the writing as in Figure
(A) will scroll on the display. Then press
(1). The
smoke fan switches on at maximum speed, the
screw feeder switches on and remains on until the
time indicated on the display is up or until the
key
(2) is pressed. (Figure B)
OFF
Menu 07
P1 to
load
90
21°
C
50
°C
load
initial
dialogue
menù level
A
B
Menù 09 - technical calibration
This item of the menu is reserved for the
installation technician.
OFF
Menu 09
Key
access
menù level
remaning time
input
Menu 05 - stand-by mode
Press the SET key. Using the key
(2), go to
menu 05 and confirm with the SET key. Using the
key
(1) choose whether to enable (ON) or
disable (OFF) the stand-by function.
Press the ON/OFF key (4) to exit.
If enabled, the device will go to stand-by once the
set temperature has been reached.
FOR AIR STOVES ONLY:
In the presence of an
external thermostat, to go to stand-by mode, both
the external thermostat and the ambient probe on
the stove must be satisfied.
off
Menu 05
mode
Stand-By
menù level
Menù 06 - buzzer mode
It allows you to enable or disable the acoustic
buzzer on the controller.
OFF
Menu 06
mode
Buzzer
Menù 08 - stove status
Displays the work status.
OFF
Menu 08
state
stove
menù level
Menù 07 - start load
This function is only available in OFF and allows
you to load the screw feeder on first start-up,
when the pellet tank is empty.
Having selected Menu 7, the writing as in Figure
(A) will scroll on the display. Then press
(1). The
smoke fan switches on at maximum speed, the
screw feeder switches on and remains on until the
time indicated on the display is up or until the
key
(2) is pressed. (Figure B)
OFF
Menu 07
P1 to
load
90
21°
C
50
°C
load
initial
dialogue
menù level
A
B
Menù 09 - technical calibration
This item of the menu is reserved for the
installation technician.
OFF
Menu 09
Key
access
menù level
remaning time
input
Summary of Contents for Francesca 17B
Page 48: ...46 EN Cod 001115 NOTES...
