background image

INSTALLATION INSTRUCTIONS

Vanity

1207801-2-

B

© 2013 KALLISTA

Questions? Problems? For additional assistance, please contact KALLISTA’s Customer

Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.

2 of 8

ThANk YOU FOR ChOOSINg kALLISTA

We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual 

before you install your KALLISTA product. If you encounter any installation or performance problems, please do 

not hesitate to contact us at the phone number listed at the bottom of the page or visit us on line at kallista.com.

BeFORe YOU BegIN

The 

Vir Stil® .75 Vanity

 consists of the following: 

 

P74205 

– .75 Wood Vanity

 

P74202-SM

 – Small Metal Base with (1 ea.) Handle

 

P74209

 – Stone Top

 

P72040

 – Undercounter Basin

The 

Vir Stil® 1.0 Vanity

 consists of the following: 

 

P74210

 – 1.0 Wood Vanity

 

P74212

 – Metal Base with (4 ea.) Handles

 

P74211

 – Stone Top

 

P72040

 – Undercounter Basin

The 

Vir Stil® 1.5 Vanity

 consists of the following: 

 

P74213

 – 1.5 Wood Vanity

 

P74215

 – Large Metal Base with (5 ea.) Handles

 

P74214

 – Large Stone Top

 

P72040

 – Undercounter Basin

 

‰

Prior to installation, unpack all products and inspect them for damage. If the product is damaged, contact 

Kallista’s Customer Service immediately at the phone number listed at the bottom of the page.

NOTe:

 Although your vanity may differ from the one shown in the illustrations, the installation steps are the 

same.

 

‰

This installation requires a minimum of two people. 

Do not

 install this fixture alone.

 

‰

The stone console lavatory can be installed with three different faucet configurations:

 

Single-hole

 for a monoblock faucet

 

Three-hole

 for a widespread faucet

 

No-hole

 for a wall-mount faucet

 

‰

Refer to your faucet installation instructions to determine which configuration is necessary for your lavatory.

 

‰

To create the holes necessary for your faucet installation, refer to the instructions in section 2.

 

‰

KALLISTA reserves the right to make revisions in the design of products without notice, as specified in the 

Price Book.

Summary of Contents for Vir Stil .75









Reviews: