INSTALLATION INSTRUCTIONS
Original For Him Dressing Table
1008300_2_A
6 of 6
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Drawer Height
Adjustment Wheel
Release Latch
Underside View
Rail
Tab
To remove the drawer:
Slide the drawer out on the rails until fully extended.
Pull both release latches toward you, then pull the front of the drawer up off the rails.
Lift the drawer out from the dressing table.
To reinstall the drawer:
Fully extend the rails.
Align the grooves on the underside of the drawer with the rails and set into place.
Hold the drawer in place on the rails with one hand. With your other hand, pull the tab on the bottom front of
the rail toward you until you hear the rail ″snap″ into place. Repeat this step for the remaining rail.
Ensure the drawer is locked into place by lightly lifting the front of the drawer upward. If the drawer does not
lift up, it is engaged. If the drawer lifts up, repeat the above procedure.
Slide the drawer in and out of the dressing table to ensure smooth operation.
Adjustment:
Slide the drawer out on the rails until fully extended.
Turn the drawer height adjustment wheels to adjust the drawer height. To lower the drawer, turn the wheel
on the left side of the drawer clockwise and/or the wheel on the right side of the drawer counterclockwise.
Turn the wheel(s) in the opposite direction to raise the drawer.
6. ReMOve/AdjUST The dRAweRS
