INSTALLATION INSTRUCTIONS
Bidet Faucet
1260871-2-B
8 of 8
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
head.
6. ADJUST THE HANDLE AND ESCUTCHEON ALIGNMENT IF NEEDED
Spline Adapter
Screw
Bearing
Handle
Loosen screws.
Tighten screws.
Pull up to remove the handle and bearing from the escutcheon.
NOTE: Use a pick or a similar tool to help remove the spline adapter.
To adjust the handle, remove the screw and reposition the spline adapter.
Reinstall the screw. Ensure that the valve is fully turned to the “OFF” position.
NOTE: To test the handle alignment, the handle does not need to be fully installed.
Insert the handle until it engages with the spline adapter to verify alignment.
Repeat this procedure until the desired handle alignment is obtained, then push the handle down until it
snaps fi rmly in place against the escutcheon.
To adjust the escutcheon, loosen the screws in the ring to allow for escutcheon adjustment.
Tighten the screws when desired escutcheon alignment is obtained.
