INSTALLATION INSTRUCTIONS
Bidet Faucet
1260871-2-B
7 of 8
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
5. COMPLETE THE INSTALLATION
Sprayhead
Spray
Assembly
Valve Inlet
Supply Hose
Shut-off Valve
Connect the supply hoses from the valve assemblies to the supply stops (Left is hot - right is cold).
Tighten all connections.
Connect the tailpiece to the P-trap (as needed).
Ensure that all connections are tight.
Open the drain.
Turn on the water supply and check for leaks. Repair as needed.
Remove the sprayhead.
Open both the hot and cold valves and run water through the transfer valve and spray assembly for about a
minute to remove debris. Check for leaks.
Turn off the water.
Reinstall the spray.
