1. Spout Installation
Slide the spout onto the spout shank.
Tighten the spout decorative nut by hand.
Remove the sleeve cap.
Loosen the tee bottom seal nut counterclockwise.
NOTE:
Using tools will damage the finish.
Remove the tee by turning the tee nut counterclockwise.
Remove the shank nut and shank washer.
Make sure the spout gasket is in place.
Slide the spout shank through the mounting hole.
Reinstall the shank washer and shank nut.
Wrench tighten the shank nut.
Reinstall the tee. Wrench tighten the tee nut.
Tighten the tee bottom seal nut.
Reinstall the sleeve cap.
Tee
Tee Bottom Seal Nut
Pop-up Rod Sleeve Cap
Shank Nut
Shank Washer
Tee Nut
Spout Gasket
Spout Shank
Pop-Up Knob
Spout
Kallista
3
1004811-2-A