INSTALLATION INSTRUCTIONS
Slidebar
1238521-2-C
6 of 6
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
screw and adjust the bracket up or down slightly. Then retighten the screw.
Using a 3/32” hex wrench, secure the setscrew at each post.
Apply silicone sealant around the perimeter of the two posts.
Wipe away any excess sealant.
ADJUST THE HANDSHOWER HOLDER POSITION
Release the gripping mechanism by rotating the handle clockwise until the handle is vertical.
Move the handshower holder up or down to the desired height, then release the handle to allow it to spring
back into position.
If necessary, fi rmly pull the handle counterclockwise to lock the gripping mechanism at the desired height.
